remoandiris Posted February 1, 2020 Report Share Posted February 1, 2020 Been looking at pickups. I like the new features that are available, but not the height of the beds. My 5er already has flipped axles. No way it'll tow flat with a new truck. The beds are just too high. Quote Link to comment Share on other sites More sharing options...
whj469 Posted February 1, 2020 Report Share Posted February 1, 2020 That is what I thought when I got a new 2019 F350 XLT, CC, long bed, diesel, 4X4 to pull my 2018 Cardinal 3825 fiver and to my surprise it was right on level with the Reese hitch in the middle setting. Have you measured it? Good Luck Quote Link to comment Share on other sites More sharing options...
NDBirdman Posted February 1, 2020 Report Share Posted February 1, 2020 Totally agree, the sides are getting taller. Putting my hitch down placing the camper close to the sides, I am still a little nose high, both my axles are also flipped. There's no way I will tow with very little side clearance. I am toying with removing my bed and putting a flat bed on. That would give me all the room I need, might look funny as heck on a mega cab.... LOL, but it is what it is. For some states, would probably change my truck status to commercial? So far it has not caused me many problems, I just need to be careful on uneven ground. I wonder if there's a way to lower my truck a couple inches without affecting ride/weight? Quote 2022 Coachman Leprechaun, traveling around to dark sky areas and chasing the stars. Link to comment Share on other sites More sharing options...
GlennWest Posted February 1, 2020 Report Share Posted February 1, 2020 When I towed with a pickup ran into same issue. I installed a western style bed and it looked great. Tool boxs big plus also. I will add weight to rear axle also. Need to figure on that. Quote 2003 Teton Grand Freedom towed with 2006 Freightliner Century 120 across the beautiful USA welding pipe.https://photos.app.goo.gl/O32ZjgzSzgK7LAyt1 Link to comment Share on other sites More sharing options...
chiefneon Posted February 2, 2020 Report Share Posted February 2, 2020 (edited) Howdy! My lovey wife decided she wanted a new truck last year after having one problem after another on our trip to Alaska and back. When I started looking at them I didn’t even consider a factory pickup bed. I went back to 2L customs and got a deal couldn’t turn down on a new Chevrolet 3500 LTZ 2L custom hauler loaded up. Only one thing that matter and that was my LW was happy with the new truck. ” Happy Trails “ Chiefneon Edited February 2, 2020 by chiefneon Quote "Class of 2007 Fulltimer's" Gary & karen Smoochie & Michaela (fur babies) 2018 Chevorlet 3500 HD/LTZ 2L Custom Hauler 2014 Heartland Cyclone 4000 2016 Smart Car Prime Link to comment Share on other sites More sharing options...
rynosback Posted February 2, 2020 Report Share Posted February 2, 2020 Yes they have been getting taller for the last 5-6 years. So much so most DRV dealers are ordering rigs with 2-3” risers. But having a custom bed, hauler bed will solve that problem. But, they are not cheap. Quote 2015 Ram 3500 RC DRW CTD AISIN 410 rear 2016 Mobile Suites 38RSB3 Link to comment Share on other sites More sharing options...
Hill_Country Posted February 2, 2020 Report Share Posted February 2, 2020 8 hours ago, NDBirdman said: Totally agree, the sides are getting taller. Putting my hitch down placing the camper close to the sides, I am still a little nose high, both my axles are also flipped. There's no way I will tow with very little side clearance. I am toying with removing my bed and putting a flat bed on. That would give me all the room I need, might look funny as heck on a mega cab.... LOL, but it is what it is. For some states, would probably change my truck status to commercial? So far it has not caused me many problems, I just need to be careful on uneven ground. I wonder if there's a way to lower my truck a couple inches without affecting ride/weight? I changed the rear axle blocks on my '17 F350 to those from an F250. That lowered the rear end to roughly level (unloaded). That 1.5 inch change allowed me to raise my AUH to the highest setting - giving me 7+ inches of bed rail clearance - without increasing the overall height of the fiver. I don't know if other brands can be lowered as simply. Quote John, Jean and Mea the Super Springer Spaniel 2019 Entegra Aspire 44B 2022 Jeep Cherokee TrailHawk Link to comment Share on other sites More sharing options...
NDBirdman Posted February 2, 2020 Report Share Posted February 2, 2020 I might have to check on that, but my springs are leaf springs, I'm pretty sure the 2500s are coil springs. I don't know for sure but I will check. I know they sell front end leveling blocks to raise the front end ~2.5 inches for a RAM 3500. Quote 2022 Coachman Leprechaun, traveling around to dark sky areas and chasing the stars. Link to comment Share on other sites More sharing options...
rickeieio Posted February 2, 2020 Report Share Posted February 2, 2020 On a Ford, no need to change axles. The difference is the spacer block between the axle and the spring pack. I used the F-250 spacer in my last two F-350s to male it easier to access the toolbox. In fact, back when I had super duties (1999-2006), the only difference between the 250 and 350 was that block, and one overload leaf. Brakes, axles, tires, etc. all the same. Quote KW T-680, POPEMOBILE Newmar X-Aire, VATICAN Lots of old motorcycles, Moto Guzzi Griso and Spyder F3 currently in the front row Young enough to play in the dirt as a retired farmer. contact me at rickeieio@yahoo.com Link to comment Share on other sites More sharing options...
noteven Posted February 2, 2020 Report Share Posted February 2, 2020 6 hours ago, rickeieio said: On a Ford, no need to change axles. The difference is the spacer block between the axle and the spring pack. I used the F-250 spacer in my last two F-350s to male it easier to access the toolbox. In fact, back when I had super duties (1999-2006), the only difference between the 250 and 350 was that block, and one overload leaf. Brakes, axles, tires, etc. all the same. Here rick I found the lid to “the door sticker ratings” can of worms quick put it back on 🤣 Quote "Are we there yet?" asked no motorcycle rider, ever. Link to comment Share on other sites More sharing options...
Hill_Country Posted February 2, 2020 Report Share Posted February 2, 2020 6 hours ago, rickeieio said: On a Ford, no need to change axles. The difference is the spacer block between the axle and the spring pack. I used the F-250 spacer in my last two F-350s to male it easier to access the toolbox. In fact, back when I had super duties (1999-2006), the only difference between the 250 and 350 was that block, and one overload leaf. Brakes, axles, tires, etc. all the same. Sorry if I wasn't clear, that's exactly what I did. Both the F250 and F350 have leaf springs and only the spacer block between the spring and the axle needs to be changed. Lowering the rear end that 1.5 inches made all the difference for my setup. The RV is level and I have plenty of bed rail clearance. Why the truck manufacturers decided to make their bed rails taller, I'll never understand. Quote John, Jean and Mea the Super Springer Spaniel 2019 Entegra Aspire 44B 2022 Jeep Cherokee TrailHawk Link to comment Share on other sites More sharing options...
Ray,IN Posted February 3, 2020 Report Share Posted February 3, 2020 This article about lowering a Ford F250 may be an interesting read. Quote 2000 Winnebago Ultimate Freedom USQ40JD, ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG retired;Good Sam Life member,FMCA ." And so, my fellow Americans: ask not what your country can do for you--ask what you can do for your country. John F. Kennedy 20 Jan 1961 Link to comment Share on other sites More sharing options...
noteven Posted February 3, 2020 Report Share Posted February 3, 2020 I have “lowering the box rails” on the Dodge 3500 on the project list. I’m waiting till I hit it with the stock trailer a few more times. Quote "Are we there yet?" asked no motorcycle rider, ever. Link to comment Share on other sites More sharing options...
jenandjon Posted February 6, 2020 Report Share Posted February 6, 2020 I think the good ole boys out in north Carolina have come up with a solution for your problem. https://www.google.com/search?client=firefox-b-1-d&q=carlolina+squat Quote Farmer, Trucker, Equipment operator, Mechanic Quando omni flunkus moritati-When all else fails, play dead I'm a man, but I can change, if I have to, I guess. Link to comment Share on other sites More sharing options...
Alie&Jim's Carrilite Posted February 7, 2020 Report Share Posted February 7, 2020 14 hours ago, jenandjon said: I think the good ole boys out in north Carolina have come up with a solution for your problem. https://www.google.com/search?client=firefox-b-1-d&q=carlolina+squat That crap didn't come from NC.... But the closer I get to California the more of it I see... Quote Jim's Adventures Old Spacecraft.... Who knows whats next Link to comment Share on other sites More sharing options...
ARGO Posted February 7, 2020 Report Share Posted February 7, 2020 I only have a 150, but wanted it to sit level. Dropped spring rear hangers was a cheap solution. Quote You'd have to see the movie to understand.......... Link to comment Share on other sites More sharing options...
NDBirdman Posted February 7, 2020 Report Share Posted February 7, 2020 12 hours ago, Alie&Jim's Carrilite said: That crap didn't come from NC.... But the closer I get to California the more of it I see... We saw that in the 80s when stationed in Phoenix, the closer we drove to komifornia, the more we saw. Quote 2022 Coachman Leprechaun, traveling around to dark sky areas and chasing the stars. Link to comment Share on other sites More sharing options...
noteven Posted February 7, 2020 Report Share Posted February 7, 2020 If you add a long travel suspension to your pick up for desert work they sit up in the front. The box floor is opened up in the rear for wheel travel. No room up front so liftage is applied. Desert racers Good for soaking up freeway bridge decks, RR “level crossings” , and “frost heaves.” Quote "Are we there yet?" asked no motorcycle rider, ever. Link to comment Share on other sites More sharing options...
Pappy Yokum Posted March 12, 2020 Report Share Posted March 12, 2020 On 2/7/2020 at 7:29 AM, NDBirdman said: We saw that in the 80s when stationed in Phoenix, the closer we drove to komifornia, the more we saw. Call Kali whatever you like..... ..... the CHP will be more than happy to issue formal "Greetings" to the operators of the vehicles in the photos, ROTFL . Quote Link to comment Share on other sites More sharing options...
Sniper Posted March 23, 2020 Report Share Posted March 23, 2020 On 2/2/2020 at 6:43 PM, Hill_Country said: Why the truck manufacturers decided to make their bed rails taller, I'll never understand. When I measured and compared the "inside bed height" of our 2001 Super Duty to our 2017 Super Duty there was very little difference. What is different, on the 17 - up Super Duty's anyway, is that the frame is an 1 1/2" taller boxed frame. Safe travels. 😊 Quote Sniper & Sweet P Escapees 124743 H.O.C. 1371 Link to comment Share on other sites More sharing options...
TXiceman Posted March 23, 2020 Report Share Posted March 23, 2020 It is not just the beds being higher. These newer trucks are all 4 wheel drive and have off road packages which makes the whole truck higher. I do not need or want a 4 wheel drive and want a lower height truck. Ken Quote Amateur radio operator, 2023 Cougar 22MLS, 2022 F150 Lariat 4x4 Off Road, Sport trim <br />Travel with 1 miniature schnauzer, 1 standard schnauzer and one African Gray parrot Link to comment Share on other sites More sharing options...
rickeieio Posted March 23, 2020 Report Share Posted March 23, 2020 5 hours ago, TXiceman said: It is not just the beds being higher. These newer trucks are all 4 wheel drive and have off road packages which makes the whole truck higher. I do not need or want a 4 wheel drive and want a lower height truck. Ken Can you give us an example of a truck that's only available in 4wd? Other than some special edition, I believe all are offered in 2wd. And the off road packages are optional, extra cost too. Quote KW T-680, POPEMOBILE Newmar X-Aire, VATICAN Lots of old motorcycles, Moto Guzzi Griso and Spyder F3 currently in the front row Young enough to play in the dirt as a retired farmer. contact me at rickeieio@yahoo.com Link to comment Share on other sites More sharing options...
mptjelgin Posted March 23, 2020 Report Share Posted March 23, 2020 I bought a 2019 Ford Superduty in 2WD. As far as I know every manufacturer continues to produce 2WD trucks. They simply aren't as popular, and therefore not as common, as the 4WD trucks. Quote Mark & Teri 2021 Grand Designs Imagine 2500RL, 2019 Ford F-350 Mark & Teri's Travels Link to comment Share on other sites More sharing options...
chirakawa Posted March 23, 2020 Report Share Posted March 23, 2020 28 minutes ago, mptjelgin said: I bought a 2019 Ford Superduty in 2WD. As far as I know every manufacturer continues to produce 2WD trucks. They simply aren't as popular, and therefore not as common, as the 4WD trucks. I think it's location dependent. I bought a new pickup in Colorado and the dealer told me they don't even get 2 wheel drive trucks in for sale. However, in Southeast Texas, probably one in ten on the lot is 4 wheel drive. I'd be interested in knowing what percentage of new pickups sold are 4 wheel drive. I'd guess it's well below 50%. A Bing search didn't give me the answer. If I'm not mistaken, Chevy 2 wheel drive and 4 wheel drive are the same bed height. Quote Everybody wanna hear the truth, but everybody tell a lie. Everybody wanna go to Heaven, but nobody want to die. Albert King Link to comment Share on other sites More sharing options...
mptjelgin Posted March 23, 2020 Report Share Posted March 23, 2020 20 minutes ago, chirakawa said: I think it's location dependent. I bought a new pickup in Colorado and the dealer told me they don't even get 2 wheel drive trucks in for sale. However, in Southeast Texas, probably one in ten on the lot is 4 wheel drive. I'd be interested in knowing what percentage of new pickups sold are 4 wheel drive. I'd guess it's well below 50%. A Bing search didn't give me the answer. If I'm not mistaken, Chevy 2 wheel drive and 4 wheel drive are the same bed height. I can see Colorado not stocking any 2WD pickups due to snow and ice concerns. But I know one could be ordered if desired. In the area where I bought my truck (Texas Hill Country) I'd wager that 80+% of pick-ups are 4WD. Not because everyone needs or uses it, but because it is "the thing to have". I know several folks with 4WD trucks that have never even put them into 4WD. Dealers will tell you that resale on a 2WD truck is lower, but so is the initial cost, I've not had any problem at all selling my last two trucks (1999 and 2010 2WD Superduties). As always, different strokes... Quote Mark & Teri 2021 Grand Designs Imagine 2500RL, 2019 Ford F-350 Mark & Teri's Travels Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.